MANAGEMENT SYSTEMS

Management systems allow municipalities to efficiently manage the luminous intensity of their street lighting luminaires.

We have developed the ECCOS energy control and management system, which makes it possible to manage the dimming of luminaires, from an individual luminaire to a large group of light points, thus being able to segment the universe of luminaires in a city by groups (e.g. avenues, streets, parks, historic areas, etc).

The ECCOS system is subdivided into three categories to cover the different needs of any municipality.

MAXIMIZING SAVINGS IN CITIES

ECCOS CITY bidirectional system enables the management of a wide range of light fixtures, individually or grouped. Each luminaire has its individual communication module built-in, supporting either GSM / M2M, Low Power WAN (LPWAN) using LoRaWAN® or NB-IoT according to the product technology version required. Managed within a central platform using Software as a Service (SaaS) model, accessible via a simple internet browser.

This system, with a very intuitive interface, enables a bidirectional communication with the luminaires, receiving technical data and optimizing the management and maintenance operations. At the same time, produces reports or structured data for further analysis.

Get to know more about the management system for Street lighting – ECCOS CITY.

MANAGEMENT UP TO 10 GROUPS OF LUMINARIES

ECCOS STREET is a dimmer system that controls the luminous intensity of street luminaires through a micro cut-off system.

Designed to control a set of luminaires, whose power supply depends on the same T.S. (Transformer Station), this system consists of modules (ECCOS ST1) that are installed in each luminaire and a controller module (ECCOS MM) that is installed in the T.S. with the capacity to manage up to 10 groups of luminaires, each one in its power supply phase.

CONTROL OF INDIVIDUAL LUMINAIRES

ECCOS SINGLE is designed for dynamic power control in street lighting fixtures, road, urban or residential outdoor luminaires. Its small dimensions allow it to be perfectly integrated into virtually any luminaire.

The ECCOS SINGLE system is the simplest one in its family, allowing you to control one single luminaire. Depending on the version, this system allows you to define up to 16 factory-defined operating modes. Its great advantage is autonomy, as it does not need any additional control.

01. ECCOS CITY

MAXIMIZING SAVINGS IN CITIES

ECCOS CITY bidirectional system enables the management of a wide range of light fixtures, individually or grouped. Each luminaire has its individual communication module built-in, supporting either GSM / M2M, Low Power WAN (LPWAN) using LoRaWAN® or NB-IoT according to the product technology version required. Managed within a central platform using Software as a Service (SaaS) model, accessible via a simple internet browser.

This system, with a very intuitive interface, enables a bidirectional communication with the luminaires, receiving technical data and optimizing the management and maintenance operations. At the same time, produces reports or structured data for further analysis.

Get to know more about the management system for Street lighting – ECCOS CITY.

02. ECCOS STREET

MANAGEMENT UP TO 10 GROUPS OF LUMINARIES

ECCOS STREET is a dimmer system that controls the luminous intensity of street luminaires through a micro cut-off system.

Designed to control a set of luminaires, whose power supply depends on the same T.S. (Transformer Station), this system consists of modules (ECCOS ST1) that are installed in each luminaire and a controller module (ECCOS MM) that is installed in the T.S. with the capacity to manage up to 10 groups of luminaires, each one in its power supply phase.

03. ECCOS SINGLE

CONTROL OF INDIVIDUAL LUMINAIRES

ECCOS SINGLE is designed for dynamic power control in street lighting fixtures, road, urban or residential outdoor luminaires. Its small dimensions allow it to be perfectly integrated into virtually any luminaire.

The ECCOS SINGLE system is the simplest one in its family, allowing you to control one single luminaire. Depending on the version, this system allows you to define up to 16 factory-defined operating modes. Its great advantage is autonomy, as it does not need any additional control.

ECCOS SYSTEMS BENEFITS

iluminacao-inteligente_eccos

Optimization of Energy Consumption

With ECCOS management systems, cities can accurately manage the luminous flux of each luminaire depending on the time of day, visibility and the detection of people or vehicles, enabling energy savings of up to 80%.
iluminacao-inteligente_eccos

Centralized Management

The ECCOS systems can be included in other city magement platforms for an integrated view of services from the same operation and control centre, reducing costs with monitoring teams.
iluminacao-inteligente_eccos

Minimization of Operating Costs

The ECCOS CITY system makes it possible to collect technical data from the luminaires – state, temperature and operating current, among others – which is supplied to technical management, allowing maintenance operations to be efficiently managed and resulting in a reduction in operating and maintenance costs.
iluminacao-inteligente_eccos

Overall Control

ECCOS is an open management system that allows integration with luminaires from the other manufacturers, thus fully protecting the customers investment. As a result, regardless of the luminaire manufacturer installed, it is possible to manage the entire pool of luminaires in a city or given location from the same management system.

ECCOS SYSTEM PROJECTS

TESTIMONIALS

Want to increase efficiency and reduce lighting costs by up to 80% in your municipality?